Bradley
Faucet eyewash station for laboratories, certified ANSI Z358.1-2009.
PD19200B
$130.15
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Bradley faucet eyewash station for laboratories (S19-200B).
Certified ANSI Z358.1-2009. Minimum flow exceeds 0.4 GPM at 30 PSI. Does not include an automated temperature control device.
Economical, practical kit for laboratories and medical facilities. Easy to use in case of emergency.
Can be installed on most standard faucets, turning them into eyewash stations as soon as needed. The eyewash can be activated in one step by pulling on the central pin. The mechanism automatically returns to the faucet position when closed.
This eyewash station ensures a safe, steady flow of water, even if the water supply pressure varies between 30 and 90 PSI.
The pipes are made of chrome-plated brass with a mirror finish, with two yellow highly visible plastic caps for the sprayheads.
The kit includes:
- 2 yellow dust caps
- 1 yoke assembly with two sprayheads
- 1 Allen wrench
- 1 set screw
- 1 diverter assembly with male 55/64” x 27 thread
- 1 threaded adapter kit:
- 1 adapter from 13/16” x 27 thread (male) to 55/64” x 27 thread (male)
- 1 shutoff
- 1 gasket kit
- 1 sign to indicate the location of the emergency eyewash
- 1 inspection tag ( english only )
- 3 instruction booklets (English, French, Spanish). Also available as PDF document, see Download tab.
Warning: This device does not include a thermostatic valve, therefore there is no automated water temperature control.
Eye injuries may be aggravated if hot water is used when rinsing.
The manufacturer recommends the installation of a thermostatic valve in order to comply with ANSI Z358.1-2009 standards. A thermostatic valve keeps rinsing water at a lukewarm temperature. Rinsing water should not be too cold (for more comfort while rinsing for the minimum required rinsing time of 15 minutes) nor too hot (to avoid aggravating eye or face injuries and to avoid scalding).
PD19200B
Data sheet
- Type of product
- Safety equipment
- Main category
- First aid and emergency showers
- Sub category
- Emergency showers
- Sub sub category
- Eyewash & face wash stations
- Name of the product
- Faucet eyewash station for laboratories
- Product code
- PD19200B
- ANSI Requirements
- Compliance ANSI Z358.1-2009
- Manufacturer
- Bradley
- Features
- This device does not include a thermostatic valve, therefore there is no automated water temperature control
- Includes
- Kit contains all necessary adapters and parts for easy installation on most faucets
- Type of emergency
- Eye wash
- Installation specifications
- Can be installed on most standard faucets, turning them into eyewash stations as soon as needed
- Activation type
- The eyewash can be activated in one step by pulling on the central pin
- Operating flow rate
- Minimum flow exceeds 0.4 GPM (1.5 L/min) at 30 PSI
- Material1
- The pipes are made of chrome-plated brass with a mirror finish
- Material2
- Two highly visible yellow plastic covers
- Length (in/cm)
- 10 in / 25.4 cm
- Width (in/cm)
- 2 in / 5.08 cm
- Height (in/cm)
- 4.5 in / 11.4 cm
- Weight (lb/kg)
- 1.1 lb / 0.49 Kg
- Sold by
- Unit
- Return conditions
- No returnable
New
You might also like
8 other products in the same category:
Customers who bought this product also bought:
