Industrial curtains

Subcategories

• 

  Materials for...

  In this category you will find various materials used for the fabrication of industrial curtains, which include splash curtains, strip curtains, welding curtains and welding blankets. All materials are sold by the square foot, so you can easily order a custom-sized curtain.

  Minimum order is 75$ before taxes per type of material.
  To order:
  

  1. Add to your cart the quantity in square feet corresponding to the total surface area of the curtain;
  2. When confirming your order, specify the curtain dimensions (height and width) in feet;
  3. If applicable, specify grommet placement: top of the curtain only, or all around curtain perimeter.

  Example:
  You wish to order a yellow vinyl curtain that will measure 8 feet high by 6 feet wide. This curtain will be installed on a rail, therefore it needs grommets along the top for S-hooks.

  1. Click on the material you wish to order. In this example, yellow vinyl is item AGFC001.
  2. You need 8 ft x 6 ft = 48 square feet of material. Type 48 in the Quantity box. Click on the red Add To Cart button.
  3. When you are ready to place your order, go to your shopping cart and follow instructions.
  4. At the address page, there is a field for adding a comment about your order. Specify in the comment that the curtain must measure 8 feet high by 6 feet wide and that grommets should be along the top only.
  5. Complete your purchase as usual.

  Some of the available materials are:

  • Clear vinyl, available in several gauges (thicknesses);

  • Tinted vinyl, available in several colors;

  • Opaque vinyl-coated polyester, available in several colors;

  • Neoprene-coated nylon (Neony), available in several densities;

  • Flame-resistant cotton duck cloth, available in several densities;

  • Inherently flame-resistant synthetic fibers : Kevlar (aramid), aluminized Kevlar, Weldflex, Agotex, Ago-Sil, Heatstop, Goldengard;

  • Clear vinyl strips for strip curtains, available in several widths.

• 

  Mounting hardware for...

  This category includes various hardware and parts required to install industrial curtains in your workplace.

  To facilitate curtain movement, you may opt for hooks or rollers:
  - Hooks require a curtain rod (not supplied). Hooks are recommended for small curtains and for curtains made of thin lightweight material.
  - Rollers require tracks (see below). Rollers are recommended for large curtains and for curtains made of thick heavyweight material. Rollers glide more easily than hooks and better spread the weight of the curtain.

  If you opt for rollers, there are several options for mounting tracks. Choose the method that best fits your needs:
  - Ceiling-mounted tracks;
  - Ceiling beam dropped tracks;
  - Floor-mounted posts.

  Wall brackets are also available to stabilize track ends. Caution: Wall brackets are not strong enough to be used as the only track anchors. Tracks must be supported by vertical anchors of some sort. 

  Here are the main hardware and parts available for installing curtain tracks:

  • Aluminum track (AGCG100);
  • 90 degrees aluminum elbow track (AGCG101);
  • Steel floor post (AGCG110);
  • Track length splicer (AGCG104);
  • Wall bracket (AGCG107);
  • Ceiling bracket (AGCG108);
  • Threaded rod with hook (AGCG118);
  • Threaded rod, sold by linear foot (AGCG114);
  • Threaded rod coupler (AGCG116);
  • Nylon roller with S-hook (AGCG102);
  • Curtain hooks (AGCG001 and AGCG002).
• 

  Welding screens

  This category groups together our portable welding screens, made of translucent vinyl on metal frames. These screens are used to create safe welding workspaces by blocking UV radiation, stopping sparks, and preventing flashes for nearby workers.

  Welding screens are available in four standard sizes:

  - 5 ft high by 4 ft wide (1.5 m by 1.2 m): AGP54
  - 5 ft high by 6 ft wide (1.5 m by 1.8 m): AGP56
  - 5 ft high by 8 ft wide (1.5 m by 2.4 m): AGP58
  - 6 ft high by 8 ft wide (1.8 m by 2.4 m): AGP68

  Welding screens are available in configurations with one, two, three or four screens. Multiple-screen configurations have screens connected by hinges. By default, screens are manufactured with fixed metal feet, but we also offer heavy-duty casters for screens that must be moved often.

  Our screens are available in four colors of translucent vinyl, suitable for most welding applications: yellow, green, blue and shade 8 green. If you wish to order welding screens made with other fire-resistant materials, please contact our customer service.