3M N95 NIOSH approved filter for filter retainer 501 and 3M 6000 series cartridges. 10 units/box.
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
3M N95 NIOSH 42 CFR 84 approved filter compatible with 3M 6000 series cartridges. This filter must be used with a cartridge and a 3M R501 filter retainer (cartridge and retainer not included). 10 units/box, 10 boxes/case.
This filter is made of a patented electrostatically charged microfiber. It is certified N95 which means it protects the user from 95% of solid, liquid and non-oil based particles in the air The letter "N" stands for "non-resistant" to oil based particles; one must thus avoid oily environment with that type of respirator.
Use for:
These filters are recommended for applications with non-oil based pesticides spraying, agriculture, spray paint, petrochemical and chemical manufacturing, varnishing, paper treatment and laboratory work.
Biological particles:
These filters help prevent the inhalation of certain airborne biological particles like mold, Bacillus anthracis (Anthrax), Mycobacterium tuberculosis (Koch's bacillus) the main causative agent of tuberculosis, pandemic flues (H5N1, H1N1), etc. However, it cannot eliminate the risk of contracting infection, illness or disease. Due to the nature of some contaminants, the exposure limit value of some products and byproducts haven’t been quantified by governmental agencies, thus wearing a respirator doesn’t necessarily protects you.
Do not use for:
Do not use on a beard and other facial hair or if the user suffers from a condition that prevents him from having direct contact with the respirator’s sides. One should never use a respirator regardless of the type of cartridge in use whenever concentrations of gases and vapours exceed 10 times the admissible limit set by the CNESST or any other regulation applicable. Avoid sandblasting and oxygen deprived environments (an atmosphere with less than 19,5 % oxygen).
Maintenance and service life:
Since this is a disposable product, there is no maintenance. Whenever it gets hard to breath, it is time to change them. The manufacturer’s limitations must be followed.
Data sheet
- Type of product
- Safety equipment
- Main category
- Personal protection
- Sub category
- Respiratory protection
- Sub sub category
- 3M respirators and cartridges
- Name of the product
- N95 filters
- Series of products
- For 7800S, FF-400, 7000, 5000, 7500, 6500, 6000 series respirators
- Product code
- R5N11
- Approved/Certified
- Meets NIOSH N95
- Manufacturer
- 3M
- Country of origin
- United State of America
- Maintenance free
- Disposable product
- Type of connection
- Bayonet type connector
- Aerosol Type
- Not-oily
- Protection against gases and vapors
- N95 - Not resistant to oily particles
- Compatibility with the mask screen used for welding
- Compatible with the mask screen used for welding
- Useful life
- 1825 Days
- Material
- Polyester
- Not washable
- It is best to replace this item when it is too contaminated, worn or soiled. Do not attempt to wash it
- Length (in/cm)
- 4.5 in / 11.43 cm
- Width (in/cm)
- 3.75 in / 9.525 cm
- Height (in/cm)
- 3.5 in / 9 cm
- Weight (lb/kg)
- 0.14 lb / 0.06 Kg
- Sold by
- Box of 10 units
- Color
- White
- Another packaging available1
- By the case of 10 box (100 units-50 pairs)
- Another packaging available2
- 110 case per pallet (11000 units-5500 pairs)
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
You might also like