- New
Semi-automatic, self-locking, oval-shaped carabiner. 11 mm opening, withstands a force of 5620 lbs (25 kN). Sold individually
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Semi-automatic, self-locking, oval-shaped carabiner. ½ inch opening, withstands a force of 5620 lbs (25 kN). Sold individually.
Semi-automatic carabiner requiring a double action to unlock and locking automatically. Oval-shaped brass hook. Opening of 5/8 po (11 mm). Suitable for anchoring fall-arrest equipment such as lanyards and self-retracting devices.
It complies with CSA Z259.12 standard, can withstand a force of 5620 lbs (25 kN) without deforming, with a capacity for 1 person with a maximum weight of 420 lbs (215 kg). The rotating locking ring withstands a force of 3600 lbs. This product also complies with ANSI Z359.12 standards.
Inspection:
The worker is responsible for performing a routine inspection before each use. During this routine inspection, the worker should observe any signs of deterioration, wear, malfunction or breakage. You must replace your carabiner at the first sign of any of the above-mentioned failures.
In addition, this carabiner should be inspected by a qualified person other than the worker using the equipment. Don't forget that the tougher the job and the more difficult the environmental conditions, the more often your equipment will need to be inspected. Sylprotec offers a safety equipment inspection service. You can find out more by consulting the Service tab under the Sylprotec logo at the top of the page.
Any equipment subjected to a fall or impact must be taken out of service.
Application:
On safety harnesses on construction sites or other activities at height, on sails and halyards.
Restriction:
Do not use bleach or other abrasive or chemical products.
Maintenance and service life:
For cleaning, use mild soap and lukewarm water (37°C). Air dry without excessive heat in a clean environment. You can lubricate the door mechanism only with graphite powder.
Suggestions:
To complete your fall protection you'll find a whole range of harnesses, lanyards and retractables.
Need additional safety equipment? See the items;
Safety goggles YA12E91001; Safety helmet TA14LR and the indispensable chin strap TA14CS, Traffic cones EPTCONE28B, Peakworks storage bag FPBAG; Fastening strap FPLA9901 under "Accessories" at the bottom of the page.
Data sheet
- Type of product
- Safety equipment
- Main category
- Personal protection
- Sub category
- Fall protection
- Sub sub category
- Anchorage & connectors
- Name of the product
- Self-locking semi-automatic carabiner
- Product code
- FPAM91
- Approved/Certified
- Complies with CSA Z259.12-18C and ANSI Z359.12 standards
- Manufacturer
- Dentec Safety Specialists
- Country of origin
- United State of America
- Reusable
- Reusable with careful inspection and proper installation
- Features
- 5/8 in / 11 mm opening
- Additional Features
- Requires a double action to unlock and locks automatically
- Characteristic adding safety
- It can withstand a force of 5620 lb (25 kN) without deforming. The rotary locking ring withstands a force of 3600 lb.
- Form
- Oval
- Material
- Steel
- Washable
- Hand wash with warm water and soap
- Length (in/cm)
- 4-1/8 in / 10.48 cm 5 in / 12.7 cm
- Width (in/cm)
- 2-3/8 in / 6.03 cm 3.5 in / 8.89 cm
- Height (in/cm)
- 0.5 in / 1.27 cm 0.75 in / 1.90 cm
- Weight (lb/kg)
- 0.49 lb / 0.22 Kg
- Sold by
- Unit
- Color
- Silver
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Caution
- The maximum weight supported is 420 lb / 190.5 kg, including clothing, tools, etc.
You might also like
8 other products in the same category:
- On sale!
- -$45.35