compare_arrows
8" axial blower, light and compact, with compartment for ducting, choice of ducting, 15, 25 or 50 ft.
search
  • 8" axial blower, light and compact, with compartment for ducting, choice of ducting, 15, 25 or 50 ft.
  • 8" axial blower, light and compact, with compartment for ducting, choice of ducting, 15, 25 or 50 ft.
Allegro

8" axial blower, light and compact, with compartment for ducting, choice of ducting, 15, 25 or 50 ft.

RA9533-15
$778.40
Length: 15 ft
Quantity

Compare
Return conditions:

No returnable if used. For more information about our return policy, please refer to the Orders and Returns.

8" / 20.32 cm diameter axial fan. It has the particularity to be light and compact. The flexible duct is stored in a removable rigid compartment that is connected to the fan by quick-clips. This fan, also known as a blower, can either extract (purge) or ventilate a confined space depending on the orientation chosen by the user.

Manufacturer's code: 9533-12, 9522-25 or 9533-50.
Also available for 220V voltages by special order.

This type of blower is used to ventilate confined spaces that do not have an explosion hazard. If this is the case, please refer to the following item RA9548-25EX.

In practice, the contaminated gases are extracted first, then a reading is taken with a gas detector equipped with a sampling pump (see DETEC4GC) and if everything is correct, the fan is reversed to push fresh air into the confined space. Because of the hazards of toxic vapours or particles in a confined space, be sure to equip your workers with gas detectors even if you have purged and ventilated the confined space.

The housing is made of lightweight polyethylene and is resistant to corrosion, UV light and most chemicals. This compact blower is super quiet according to the manufacturer. However, it recommends wearing hearing protection for people near the blower in its instruction manual. The blower has nine polypropylene blades, a powdered steel grill and a carrying handle moulded into the blower. This blower is also equipped with a single-phase electric motor.

The lower housing provides safe and convenient storage of electrical components. Both sides of the fan have connection rings for attaching ductwork. This makes it easy to switch to exhaust or ventilation mode quickly depending on which side you choose.


Motor part features:

  • 1/3 HP power
  • Power supply: 115 Volts AC, 60 HZ, 1 phase
  • RPM : 2800 (for 115 VAC, 60 Hz)
  • Current: 4.5A for 60 Hz
  • Power cords: 10 feet / 3.05 m AWG
  • Branching type: NEMA 5-15P

Blower Features:

  • Equipped with 9 polypropylene blades
  • Generates 831 cfm / 1411.87 m3/h without ductwork

Ducting characteristics:

  • 8" / 20.32 cm diameter
  • 15 ft / 4.57 m, 25 ft / 7.62 m or 50 ft / 15.2 m long
  • Made of vinyl and polyester coated with chlorinated polyvinyl (PVC)
  • One ply
  • High temperature resistant - 180°F / 82.22 °C
  • Compressible for easy storage
  • Class 1 steel frame
  • Meets ASTM 227 standards
  • Nylon tie ends

Installation Tips:

The manufacturer recommends that the fan be installed more than 5 feet away from the hole entrance. To choose the safest location for you. Ensure the wind is flowing in the right direction. When venting the place, so that the fumes disperse with the help of the wind without it returning to you. In the same way during the ventilation, place the blower with your back to the wind. This way you will avoid gas mixtures expelled from the enclosed space.

If you wish to replace your ventilation duct, two lengths are available: 15 feet / 4.57 m or 25 feet / 7.62 m. You will find them under the reference RA9500-815 or RA9500-825. If your blower needs a small repair, you can also consult the list of components under the download tab.

Other equipment frequently used with this blower:

 

How to select your blower.

In order to choose the right blower, we suggest you use the application developed by Allegro Industries. This application will allow you to select the right fan based on the specific parameters of your enclosed space. To know.

  • Dangerousness of the gas, explosive or not
  • The size and shape of the space, its volume
  • The number of elbows in the duct installation
  • And much more...

We suggest that you first read the user's guide for this application (in English only) which you will find at the following Internet address: https://www.allegrosafety.com/how-to-use-our-confined-space-blower-selector/.
Then, you can go directly to the application and download it on your computer or even on your smartphone: https://www.allegrosafety.com/blower-selector/.

The texts colored in green correspond to hyperlinks leading to specific safety equipment or to a general information link.

 

RA9533-15

Data sheet

Type of product
Safety equipment
Main category
Industrial accessoiries
Sub category
Asbestos decontamination
Name of the product
Axial blower for confined spaces
Series of products
COM-PAZ-IAL PLASTIC BLOWERS
Product code
RA9533
Product use
Fans and accessories for confined spaces
Approved/Certified
Meets ASTM 227 standards
Manufacturer
Allegro industries
Country of origin
United State of America
Diameter of the opening
8 in / 20.32 cm
Choice of format
Available in 3 lengths of duct: 15 ft / 4.57 m, 25 ft / 7.62 m or 50 ft / 15.2 m
Reusable
Reusable with careful inspection and proper installation
Features
Can both extract (purge) or ventilate a confined space
Additional Features
The blower is equipped with six polypropylene blades, a powder-coated steel grille and a carrying handle molded into the blower itself
Includes
Quick connect fasteners on the ends made of nylon
Includes 2
Lower casing provides safe and convenient storage of electrical components
Property of the material
Lightweight polyethylene housing resists corrosion, UV light and most chemicals
Motor (HP)
1/3 HP
Motor in Volts
115 V AC, 60 HZ, 1 phase
Motor (Hertz)
60/50 Hz
Motor (RPM)
2800 RPM for 115 V AC at 60 Hz
Motor Current draw
4.5 A at 60 Hz
Operating flow rate
831 cfm / 1411.87 m³/hr without duct at 60Hz
Type of ventilation duct
Class 1 steel reinforced compressible conduit for toxic environments
Ventilation duct material
Made of one ply material, vinyl and polyester coated with PVC
Inside diameter of the duct
8 in / 20.32 cm diameter
Thermal resistance of the duct
Withstands temperatures up to 180°F / 88.2°C
Length of the duct
Depending on product selection: 15 ft, 25 ft or 50 ft /4.57m , 7.62 m or 15.2 m
Duct compliance
Meets ASTM 227 standards
Connects with
Can be connected with an extension (RA9540-53 sold separately) if needed
Number of blades
Equipped with 9 polypropylene blades
Cord length
10 ft / 3.05 m AWG
Type of plug
NEMA 5-15P
Material1
Polyethylene
Material2
Steel
Material3
Rubber
Length (in/cm)
39 in / 99.06 cm
Width (in/cm)
16 in / 40.6 cm
Height (in/cm)
16 in / 40.64 cm
Weight (lb/kg)
53 lb / 24 Kg
***Size and weight according to selection***
Based on the RA9533-25
Availability
Also available for 220V voltages on special order
Sold by
Unit
Color
Orange/Yellow/black
Shipping restriction
Surcharge on the cost of delivery
Return conditions
No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
New

You might also like

8 other products in the same category:

Customers who bought this product also bought: