Bradley floor-mounted emergency safety shower made of stainless steel, certified ANSI Z358.1-2009.
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Bradley floor-mounted emergency safety shower (S19110SS), made entirely of stainless steel. Certified ANSI Z358.1-2009.
This emergency safety shower has a flow of 22 GPM (83.3 L/min), exceeding the minimum flow requirement of 20 GPM (76 L/min). This shower does not include a device for controlling water temperature.
Ideal for laboratories, medical facilities, industries, workshops, garages, airports, food processing plants, paper mills, and any other places where workers risk being exposed to dust, particulates, and/or hazardous, irritating or corrosive materials.
This floor-mounted emergency safety shower can be installed in open areas, away from walls. It is designed to accommodate ceilings of 8 feet (2.44 m). The emergency safety shower is easy to activate in a single step, simply by pulling on the rigid, triangular handle. Once activated, the emergency safety shower will stay on until manually turned off by returning the handle to its original position.
The emergency safety shower has a stainless steel SpinTec showerhead that imparts a spiralling motion to the water jet, allowing an even flow of water over a larger area. All pipes are also made of stainless steel. This safety shower does not include a drainpipe.
The package includes:
- Parts necessary for the installation of the emergency shower and the connection to a water supply (some parts are not supplied, see instructions)
- 1 universal safety sign to indicate the location of the emergency shower
- 1 inspection tag
- 1 instructions booklet, available only in English. PDF version also available, see below.
The manufacturer recommends the installation of a thermostatic valve in order to comply with ANSI Z358.1-2009 standards. A thermostatic valve keeps rinsing water at a lukewarm temperature. Rinsing water should not be too cold (for more comfort while rinsing for the minimum required rinsing time of 15 minutes) nor too hot (to avoid aggravating eye or face injuries and to avoid scalding).
We would also like to remind our customers that the emergency shower must not be used to rinse eyes, since the water flow is too strong and may aggravate eye injuries.
Data sheet
- Type of product
- Safety equipment
- Main category
- First aid and emergency showers
- Sub category
- Emergency showers
- Sub sub category
- Emergency showers
- Name of the product
- Bradley Emergency Body Shower
- Product code
- PD19110SS
- ANSI Requirements
- Compliance ANSI Z358.1-2009
- Manufacturer
- Bradley
- Features
- Not include a device for controlling water temperature
- Includes
- Parts necessary for the installation of the emergency shower and eyewash station and the connection to a water supply (some parts are not supplied, see instructions)
- Installation specifications
- This body shower is floor mounted, so it can be installed in open areas, away from walls. It is designed for ceilings up to 8 feet (2.44 m) high
- Activation type
- The emergency safety shower is easy to activate in a single step, simply by pulling on the rigid, triangular handle. Once activated, the emergency safety shower will stay on until manually turned off by returning the handle to its original position.
- Operating flow rate
- Flow of 22 GPM (83.3 L/min), exceeding the minimum flow requirement of 20 GPM (76 L/min)
- Material1
- This body shower is equipped with a stainless steel SpinTec head, which imposes a spiral movement to the water jet. The piping is also made of stainless steel
- Length (in/cm)
- 36 in / 91.44 cm
- Width (in/cm)
- 12 in / 30.48 cm
- Height (in/cm)
- 8 in / 20.32 cm
- Weight (lb/kg)
- 30 lb / 13.6 Kg
- Sold by
- Unit
- Return conditions
- No returnable
You might also like