0 compare_arrows
Bradley pedestal Halo eye wash with plastic bowl, certified ANSI Z358.1-2009.
search
  • Bradley pedestal Halo eye wash with plastic bowl, certified ANSI Z358.1-2009.
Bradley

Bradley pedestal Halo eye wash / face with plastic bowl, certified ANSI Z358.1-2009.

PD19214FW
$626.75
Quantity

Return conditions:

No returnable if used. For more information about our return policy, please refer to the Orders and Returns.

Bradley pedestal Halo eye/face wash station (S19214FW), with a yellow plastic bowl.

Certified ANSI Z358.1-2009. Minimum flow exceeds 3.0 gpm (11.4 L/min). It does not include a device for controlling water temperature.

Ideal for laboratories, medical facilities, industries, workshops, garages, airports, food processing plants, paper mills, and any other places where workers risk being exposed to dust, particulates or dangerous materials.

This eye wash station is mounted on the floor and does not need to be placed close to walls. Its single-step activation simply requires a push on the large handle, leaving a user’s hands free once turned on. Once activated, the wash station will stay on until manually turned off. The spray heads have a unique elongated design, with multiple water jets, that cover more area than traditional face wash spray heads and facilitate face rinsing. This eye/face wash station is also barrier-free, for use by people in wheelchairs.

The wash station has separate pipes for water intake and drain, and ensures a safe, steady flow of water, even if the water supply pressure varies between 30 and 90 PSI. The bowl is made of yellow impact-resistant plastic. The spray heads are equipped with strainers to filter water particulates, and with antimicrobial protection. Yellow and gray plastic covers protect the spray heads from dust. Pipes are made of galvanized steel protected by a yellow Bradtec covering.

The kit includes:

  • Parts necessary for the installation of the wash station and the connection to a water supply (some parts are not supplied, see instructions).
  • 1 universal safety sign to indicate the location of the emergency wash station
  • 1 inspection tag
  • 1 trilingual instruction booklet (English, French, Spanish). PDF version is also available, see below.

The manufacturer recommends the installation of a thermostatic valve in order to comply with ANSI Z358.1-2009 standards. A thermostatic valve keeps rinsing water at a lukewarm temperature. Rinsing water should not be too cold (for more comfort while rinsing for the minimum required rinsing time of 15 minutes) nor too hot (to avoid aggravating eye or face injuries and to avoid scalding).

Ensure the safety and well-being of your staff in case of an emergency with the Bradley Halo eye/face wash station pedestal .

 Designed for maximum efficiency, this eyewash station features a robust and durable plastic bowl, meeting the stringent ANSI Z358.1-2009 standards. Its ergonomic design and ease of use make it an essential item for any industrial and commercial environment where safety is paramount. Let this high-quality eyewash station provide the protection your employees need in an emergency.

Make safety a priority.

Peculiarities of:
This eyewash station is unique for its innovative design, ensuring optimal coverage for eye rinsing in case of an incident. Its robustness and compliance with standards make it a safe and reliable choice for companies concerned about employee safety.

Application:
To use the Halo pedestal eyewash by Bradley, activate the water flow by pushing the lever and positioning your eyes over the stainless-steel bowl, keeping them open to ensure thorough rinsing. Continue rinsing your eyes until all hazardous substances are washed away, taking care not to rub your eyes to avoid further irritation.

Maintenance and service life: 
To maintain the Halo pedestal eyewash by Bradley, it is important to regularly check its proper functioning by conducting periodic tests. Clean the stainless-steel bowl and components to prevent the buildup of dirt or deposits that could obstruct the water flow. Also, ensure that the fittings are secure and there are no leaks. If any malfunctions or damaged parts are found, replace them immediately to ensure optimal use in case of an emergency.

Suggestions:
Do you need additional safety equipment? Check out the following items: CDN Eye Wash Poster (ECU505-812), rigid plastic eye patches, 7.5 X 1.25 X 3.8 cm (PS511), sterile eye pads, 4.1 X 6.6 cm (PS514), Cederroth emergency eye wash solution (PD505-235), wall-mounted eye wash kit, 1 liter (PD520), wall mount for Cederroth eye wash solution (PD505S).

Under “Accessories” at the bottom of the page. If you're looking for work equipment, see the following products: Earplugs (OA101) and 3M N95 respirators (R8210).

Texts colored green correspond to hyperlinks leading to specific safety equipment or general information.

PD19214FW

Data sheet

Type of product
Safety equipment
Main category
First aid and emergency showers
Sub category
Emergency showers
Sub sub category
Eyewash & face wash stations
Name of the product
Bradley pedestal Halo eye wash
Product code
PD19214FW
Sort by keywords
Pedestal eyewash station
ANSI Requirements
Compliance ANSI Z358.1-2009
Manufacturer
Bradley
Features
This device does not include a thermostatic valve, therefore there is no automated water temperature control
Additional Features
The heads are equipped with filters to retain water particles and antimicrobial protection
Comfort features
The unique design of the heads, with multiple water jets, covers a wider area than traditional face shower models, making it easier to wash the face
Includes
Parts necessary for the installation of the eyewash station and the connection to a water supply (some parts are not supplied, see instructions)
Type of emergency
Eye/Face Wash
Installation specifications
This eyewash station attaches to the floor, so it doesn't need to be placed near the walls
Activation type
It is activated in one movement by pressing either the large lever or the foot pedal to keep your hands free. In addition, this eye and face shower can be used by people in wheelchairs.
Operating flow rate
Allows a minimum flow of 3 GPM (11.4 L/min) at 30 PSI
Material1
The bowl is made of yellow impact resistant plastic. The piping is made of galvanized steel protected by the yellow Bradtect coating
Material2
Yellow plastic lids
Length (in/cm)
36 in / 91.44 cm
Width (in/cm)
18 in / 45.72 cm
Height (in/cm)
18 in / 45.72 cm
Weight (lb/kg)
15 lb / 6.80 Kg
Sold by
Unit
Return conditions
No returnable
New

You might also like