Bradley
Bradley wall-mounted Halo eye/face wash with stainless steel bowl, dust cover, tailpiece and P-trap, certified ANSI Z358.1-2009.
PD19224DCRPT
$1,038.50
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Bradley wall-mounted Halo eye/face wash station (S19224DCRPT) with a stainless steel bowl, a hinged dust cover, a tailpiece and a P-trap.
Certified ANSI Z358.1-2009. Minimum flow exceeds 3.0 gpm (11.4 L/min). It does not include a device for controlling water temperature.
Ideal for laboratories, medical facilities, industries, workshops, and any other places where workers risk being exposed to dust, particulates or dangerous materials.
This eye/face wash station is wall-mounted and keeps the floor area cleared. Its single-step activation simply requires a push on the large handle, leaving a user’s hands free once turned on. The hinged dust cover tilts open at the same time as the handle moves. The spray heads have a unique elongated design, with multiple water jets, that cover more area than traditional face wash spray heads and facilitate face rinsing. This eye/face wash station is also barrier-free, for use by people in wheelchairs.
The wash station has separate pipes for water intake and drain, and ensures a safe, steady flow of water, even if the water supply pressure varies between 30 and 90 PSI. The bowl and dust cover are made of heavy-duty stainless steel. The spray heads are equipped with strainers to filter water particulates, and with antimicrobial protection. Pipes are made of stainless steel.
The kit includes:
- Parts necessary for the installation of the wash station and the connection to a water supply (some parts are not supplied, see instructions)
- 1 universal safety sign to indicate the location of the emergency wash station
- 1 inspection tag
- 1 trilingual instruction booklet (English, French, Spanish). PDF version is also available, see below.
The manufacturer recommends the installation of a thermostatic valve in order to comply with ANSI Z358.1-2009 standards. A thermostatic valve keeps rinsing water at a lukewarm temperature. Rinsing water should not be too cold (for more comfort while rinsing for the minimum required rinsing time of 15 minutes) nor too hot (to avoid aggravating eye or face injuries and to avoid scalding).
The wall-mounted Halo eye and face wash by Bradley provide maximum safety in emergencies.
Equipped with a stainless steel bowl and dust cover, this unit is ANSI Z358.1-2009 approved, ensuring top-notch quality and efficiency. Its ergonomic design allows for quick and easy use, making it essential in industrial environments.
Protect your employees by investing in a reliable and effective solution.
Peculiarities of:
What sets this eye and face wash apart is its ability to provide immediate and effective protection in the event of accidental exposure to hazardous substances. Its mechanism is designed for rapid activation, minimizing the impact of workplace accidents. Its robustness and durability make it a reliable investment for any industrial environment, offering peace of mind by adhering to the highest safety standards.
Application:
To use the eye and face wash, stand in front of the unit and pull the handle to activate the flow of water. This will allow you to rinse your eyes and face immediately, reducing the impact of chemicals or particles.
Maintenance and service life:
To maintain the eye and face wash, it's important to regularly check the unit for any damage or obstructions. Clean the bowl and components with a soft cloth and non-abrasive cleaners to prevent mineral buildup. Periodically test the activation mechanism to ensure optimal performance in case of an emergency.
Suggestions:
Do you need additional safety equipment? Check out the following items: CDN Eye Wash Poster (ECU505-812), rigid plastic eye patches, 7.5 X 1.25 X 3.8 cm (PS511), sterile eye pads, 4.1 X 6.6 cm (PS514), Cederroth emergency eye wash solution (PD505-235), wall-mounted eye wash kit, 1 liter (PD520), wall mount for Cederroth eye wash solution (PD505S).
Under “Accessories” at the bottom of the page. If you're looking for work equipment, see the following products: Earplugs (OA101) and 3M N95 respirators (R8210).
PD19224DCRPT
Data sheet
- Type of product
- Safety equipment
- Main category
- First aid and emergency showers
- Sub category
- Emergency showers
- Sub sub category
- Eyewash & face wash stations
- Name of the product
- Halo wall mounted eye and face shower
- Product code
- PD19224DCRPT
- Sort by keywords
- Steel dust shower
- ANSI Requirements
- Compliance ANSI Z358.1-2009
- Manufacturer
- Bradley
- Features
- This device does not include a thermostatic valve, therefore there is no automated water temperature control
- Additional Features
- The heads are equipped with filters to retain water particles and antimicrobial protection
- Comfort features
- The unique design of the heads, with multiple water jets, covers a wider area than traditional face shower models, making it easier to wash the face
- Includes
- Parts necessary for the installation of the eyewash station and the connection to a water supply (some parts are not supplied, see instructions)
- Type of emergency
- Eye/Face Wash
- Installation specifications
- This eyewash can be installed on a wall, without cluttering the floor
- Activation type
- Push on the large handle, leaving a user’s hands free once turned on. The hinged dust cover tilts open at the same time as the handle moves. This eye wash station is also barrier-free, for use by people in wheelchairs.
- Operating flow rate
- Allows a minimum flow of 3 GPM (11.4 L/min) at 30 PSI
- Material1
- The bowl and the cover are made of stainless steel, strong and resistant. The piping is made of stainless steel
- Length (in/cm)
- 26 in / 66.04 cm
- Width (in/cm)
- 16 in / 40.6 cm
- Height (in/cm)
- 13 in / 33 cm
- Weight (lb/kg)
- 17 lb / 7.7 Kg
- Sold by
- Unit
- Return conditions
- No returnable
New
You might also like
8 other products in the same category:
