0 compare_arrows
Bradley wall-mounted Halo eye/face wash with plastic bowl, certified ANSI Z358.1-2009.
search
  • Bradley wall-mounted Halo eye/face wash with plastic bowl, certified ANSI Z358.1-2009.
Bradley

Bradley wall-mounted Halo eye/face wash with plastic bowl, certified ANSI Z358.1-2009.

PD19224FW
$500.15
Quantity

Return conditions:

No returnable if used. For more information about our return policy, please refer to the Orders and Returns.

Bradley wall-mounted Halo eye/face wash station (S19224EW).

Certified ANSI Z358.1-2009. Minimum flow exceeds 3.0 GPM (11.4 L/min). It does not include a device for controlling water temperature.

Ideal for laboratories, medical facilities, industries, workshops, and any other places where workers risk being exposed to dust, particulates or dangerous materials.

This eye/face wash station is wall-mounted and keeps the floor area cleared. Its single-step activation simply requires a push on the large handle, leaving a user’s hands free once turned on. The spray heads have a unique elongated design, with multiple water jets, that cover more area than traditional face wash spray heads and facilitate face rinsing. This eye/face wash station is also barrier-free, for use by people in wheelchairs.

The wash station has separate pipes for water intake and drain, and ensures a safe, steady flow of water, even if the water supply pressure varies between 30 and 90 PSI. The bowl is made of yellow impact-resistant plastic. The spray heads are equipped with strainers to filter water particulates, and with antimicrobial protection. Yellow and gray plastic caps protect the spray heads from dust. Pipes are made of galvanized steel protected by a yellow Bradtec covering.

The kit includes:

  • Parts necessary for the installation of the eye/face wash station and the connection to a water supply (some parts are not supplied, see instructions).
  • 1 universal safety sign to indicate the location of the emergency wash station
  • 1 inspection tag
  • 1 trilingual instruction booklet (English, French, Spanish). PDF version is also available, see below.

The manufacturer recommends the installation of a thermostatic valve in order to comply with ANSI Z358.1-2009 standards. A thermostatic valve keeps rinsing water at a lukewarm temperature.  Rinsing water should not be too cold (for more comfort while rinsing for the minimum required rinsing time of 15 minutes) nor too hot (to avoid aggravating eye or face injuries and to avoid scalding).

The Bradley Halo wall-mounted eye and face wash station, featuring a plastic bowl, is an essential tool for ensuring workplace safety. Compliant with ANSI Z358.1-2009 standards, it provides quick and effective intervention in case of an emergency. Offer your team optimal protection with this reliable and durable device.

 Make safety a priority.

Peculiarities of:
The Bradley Halo wall-mounted eye and face wash station stands out for its durable plastic bowl and adherence to ANSI safety standards. It provides an efficient and prompt solution in emergencies, ensuring optimal cleansing for the eyes and face.

Application:
To use the Bradley Halo wall-mounted eye and face wash station, direct the water jet towards the eyes and face in case of an emergency. The manual washing system ensures quick and effective cleansing, carefully removing harmful substances.

Maintenance and service life: 
The Bradley Halo wall-mounted eye and face wash station should be stored in a clean, dry place, away from dust and contaminants. Ensure that all components are well protected and easily accessible if needed.

Suggestions:
Do you need additional safety equipment? Check out the following items: CDN Eye Wash Poster (ECU505-812), rigid plastic eye patches, 7.5 X 1.25 X 3.8 cm (PS511), sterile eye pads, 4.1 X 6.6 cm (PS514), Cederroth emergency eye wash solution (PD505-235), wall-mounted eye wash kit, 1 liter (PD520), wall mount for Cederroth eye wash solution (PD505S).

Under “Accessories” at the bottom of the page. If you're looking for work equipment, see the following products: Earplugs (OA101) and 3M N95 respirators (R8210).

Texts colored green correspond to hyperlinks leading to specific safety equipment or general information.

PD19224FW

Data sheet

Type of product
Safety equipment
Main category
First aid and emergency showers
Sub category
Emergency showers
Sub sub category
Eyewash & face wash stations
Name of the product
Halo wall mounted eye and face shower
Product code
PD19224FW
Sort by keywords
Plastic wall-mounted face shower
ANSI Requirements
Compliance ANSI Z358.1-2009
Manufacturer
Bradley
Features
This device does not include a thermostatic valve, therefore there is no automated water temperature control
Additional Features
The heads are equipped with filters to retain water particles and antimicrobial protection
Comfort features
The unique design of the heads, with multiple water jets, covers a wider area than traditional face shower models, making it easier to wash the face
Includes
Parts necessary for the installation of the eyewash station and the connection to a water supply (some parts are not supplied, see instructions)
Type of emergency
Eye/Face Wash
Installation specifications
This eyewash can be installed on a wall, without cluttering the floor
Activation type
Its single-step activation simply requires a push on the large handle, leaving a user’s hands free once turned on. This eye wash station is also barrier-free, for use by people in wheelchairs.
Operating flow rate
Allows a minimum flow of 3 GPM (11.4 L/min) at 30 PSI
Material1
The bowl is made of yellow impact resistant plastic. The piping is made of galvanized steel protected by the yellow Bradtect coating
Material2
Yellow plastic lids
Length (in/cm)
24 in / 60.9 cm
Width (in/cm)
24 in / 60.9 cm
Height (in/cm)
24 in / 60.96 cm
Weight (lb/kg)
10 lb / 4.5 Kg
Sold by
Unit
Return conditions
No returnable
New

You might also like