Bradley wall-mounted Halo eye wash with plastic bowl and hinged dust cover, certified ANSI Z358.1-2009.

Bradley wall-mounted Halo eye wash station (S19224PDC) with a yellow plastic bowl and clear hinged dust cover.

Certified ANSI Z358.1-2009. Minimum flow exceeds 0.4 GPM (1.5 L/min). It does not include a device for controlling water temperature.

Ideal for laboratories, medical facilities, industries, workshops, and any other places where workers risk being exposed to dust, particulates or dangerous materials.

This eye wash station is wall-mounted and keeps the floor area cleared. Its single-step activation simply requires a push on the large handle, leaving a user’s hands free once turned on. The hinged dust cover tilts open at the same time as the handle moves. This eye wash station is also barrier-free, for use by people in wheelchairs.

The eye wash station has separate pipes for water intake and drain, and ensures a safe, steady flow of water, even if the water supply pressure varies between 30 and 90 PSI. The bowl is made of yellow impact-resistant plastic. The spray heads are equipped with strainers to filter water particulates, and with antimicrobial protection. Pipes are made of galvanized steel protected by a yellow Bradtec covering.

The kit includes:

• Parts necessary for the installation of the eye wash station and the connection to a water supply (some parts are not supplied, see instructions)
• 1 universal safety sign to indicate the location of the emergency eyewash station
• 1 inspection tag
• 1 trilingual instruction booklet (English, French, Spanish). PDF version is also available, see below.

The manufacturer recommends the installation of a thermostatic valve in order to comply with ANSI Z358.1-2009 standards. A thermostatic valve keeps rinsing water at a lukewarm temperature.  Rinsing water should not be too cold (for more comfort while rinsing for the minimum required rinsing time of 15 minutes) nor too hot (to avoid aggravating eye or face injuries and to avoid scalding).

Introducing the Halo wall-mounted eye wash station by Bradley, an essential safety solution for professional environments.

Designed with a plastic bowl and dust cover, this eye wash station ensures optimal protection in the event of chemical accidents. Compliant with ANSI Z358.1-2009 standards, it guarantees reliable and efficient performance. Easy to install, it provides a quick response for eye rinsing, ensuring the safety and well-being of your employees.

 Make safety a priority.

Peculiarities of:
This model stands out with its innovative Halo system that provides uniform and complete coverage during eye rinsing. Its ergonomic design allows for intuitive and quick use, which is crucial in emergencies.

Application:
To use this Halo wall-mounted eye wash station, direct the water flow towards your eyes immediately after exposure to chemicals. Maintain a steady pressure to allow for efficient and rapid rinsing, ensuring proper decontamination of your eyes.

Maintenance and service life: 
To store this Halo wall-mounted eye wash station, it is crucial to place it in a clean and dry location, away from dust and potential contaminants. Ensure that it remains easily accessible in case of an emergency, while protecting it from extreme environmental conditions.

Suggestions:
Do you need additional safety equipment? Check out the following items: CDN Eye Wash Poster (ECU505-812), rigid plastic eye patches, 7.5 X 1.25 X 3.8 cm (PS511), sterile eye pads, 4.1 X 6.6 cm (PS514), Cederroth emergency eye wash solution (PD505-235), wall-mounted eye wash kit, 1 liter (PD520), wall mount for Cederroth eye wash solution (PD505S).

Under “Accessories” at the bottom of the page. If you're looking for work equipment, see the following products: Earplugs (OA101) and 3M N95 respirators (R8210).

Texts colored green correspond to hyperlinks leading to specific safety equipment or general information.