0 compare_arrows
Bradley wall-mounted Halo eye/face wash with plastic bowl and hinged dust cover, certified ANSI Z358.1-2009.
search
  • Bradley wall-mounted Halo eye/face wash with plastic bowl and hinged dust cover, certified ANSI Z358.1-2009.
Bradley

Bradley wall-mounted Halo eye/face wash with plastic bowl and hinged dust cover, certified ANSI Z358.1-2009.

PD19224PDCFW
$668.95
Quantity

Return conditions:

No returnable if used. For more information about our return policy, please refer to the Orders and Returns.

Bradley wall-mounted Halo eye/face wash station (S19224PDCFW) with a yellow plastic bowl and clear hinged dust cover.

Certified ANSI Z358.1-2009. Minimum flow exceeds 3.0 gpm (11.4 L/min). It does not include a device for controlling water temperature.

Ideal for laboratories, medical facilities, industries, workshops, and any other places where workers risk being exposed to dust, particulates or dangerous materials.

This eye/face wash station is wall-mounted and keeps the floor area cleared. Its single-step activation simply requires a push on the large handle, leaving a user’s hands free once turned on. The hinged dust cover tilts open at the same time as the handle moves. The spray heads have a unique elongated design, with multiple water jets, that cover more area than traditional face wash spray heads and facilitate face rinsing. This eye/face wash station is also barrier-free, for use by people in wheelchairs.

The wash station has separate pipes for water intake and drain, and ensures a safe, steady flow of water, even if the water supply pressure varies between 30 and 90 PSI. The bowl is made of yellow impact-resistant plastic. The spray heads are equipped with strainers to filter water particulates, and with antimicrobial protection. Pipes are made of galvanized steel protected by a yellow Bradtec covering.

The kit includes:

  • Parts necessary for the installation of the wash station and the connection to a water supply (some parts are not supplied, see instructions)
  • 1 universal safety sign to indicate the location of the emergency wash station
  • 1 inspection tag
  • 1 trilingual instruction booklet (English, French, Spanish). PDF version is also available, see below.

The manufacturer recommends the installation of a thermostatic valve in order to comply with ANSI Z358.1-2009 standards. A thermostatic valve keeps rinsing water at a lukewarm temperature.  Rinsing water should not be too cold (for more comfort while rinsing for the minimum required rinsing time of 15 minutes) nor too hot (to avoid aggravating eye or face injuries and to avoid scalding).

Choose safety and reliability with the Bradley Halo wall-mounted eyewash and face wash station.

 Designed to meet the highest standards, this eyewash and face wash station is equipped with a plastic bowl and dust cover, ensuring optimal protection. Compliant with ANSI Z358.1-2009 standards, it guarantees efficient and safe use in case of an emergency. Perfect for industrial and commercial environments, this eyewash and face wash station is an essential choice for any company concerned about the well-being of its employees.

Make safety a priority.

Peculiarities of:
This eyewash and face wash station stands out for its integrated dust cover, providing extra protection against contaminants. Its wall-mounted installation allows for easy and accessible use, making it ideal for work environments where space is limited.

Application:
To use this eyewash and face wash station, start by removing the dust cover. Then, position yourself in front of the plastic bowl and pull the handle to activate the water flow. Rinse your eyes and face thoroughly for at least 15 minutes, keeping your eyes open and moving your head to ensure that the entire affected area is properly rinsed. Once finished, release the handle to stop the water flow and replace the dust cover.

Maintenance and service life: 
To store this eyewash and face wash station, ensure it is placed in a dry and clean area, away from dust and contaminants. Make sure that access is easy and unobstructed in case of an emergency. Regular maintenance is also required to ensure its proper functioning.

Suggestions:
Do you need additional safety equipment? Check out the following items: CDN Eye Wash Poster (ECU505-812), rigid plastic eye patches, 7.5 X 1.25 X 3.8 cm (PS511), sterile eye pads, 4.1 X 6.6 cm (PS514), Cederroth emergency eye wash solution (PD505-235), wall-mounted eye wash kit, 1 liter (PD520), wall mount for Cederroth eye wash solution (PD505S).

Under “Accessories” at the bottom of the page. If you're looking for work equipment, see the following products: Earplugs (OA101) and 3M N95 respirators (R8210).

Texts colored green correspond to hyperlinks leading to specific safety equipment or general information.

PD19224PDCFW

Data sheet

Type of product
Safety equipment
Main category
First aid and emergency showers
Sub category
Emergency showers
Sub sub category
Eyewash & face wash stations
Name of the product
Halo wall mounted eye and face shower
Product code
PD19224PDCFW
Sort by keywords
Plastic dust shower
ANSI Requirements
Compliance ANSI Z358.1-2009
Manufacturer
Bradley
Features
This device does not include a thermostatic valve, therefore there is no automated water temperature control
Additional Features
The heads are equipped with filters to retain water particles and antimicrobial protection
Comfort features
The unique design of the heads, with multiple water jets, covers a wider area than traditional face shower models, making it easier to wash the face
Includes
Parts necessary for the installation of the eyewash station and the connection to a water supply (some parts are not supplied, see instructions)
Type of emergency
Eye/Face Wash
Installation specifications
This eyewash can be installed on a wall, without cluttering the floor
Activation type
Push on the large handle, leaving a user’s hands free once turned on. The hinged dust cover tilts open at the same time as the handle moves. This eye wash station is also barrier-free, for use by people in wheelchairs.
Operating flow rate
Allows a minimum flow of 3 GPM (11.4 L/min) at 30 PSI
Material1
The bowl is made of yellow impact resistant plastic. The piping is made of galvanized steel protected by the yellow Bradtect coating
Length (in/cm)
26 in / 66.04 cm
Width (in/cm)
15.5 in / 39.37 cm
Height (in/cm)
13 in / 33 cm
Weight (lb/kg)
15 lb / 6.80 Kg
Sold by
Unit
Return conditions
No returnable
New

You might also like