Peakworks
Peakworks contractor harness 1 D ring, class A, universal size
FPH2000A
$91.95
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Safety harness by Peakworks. CSA class A, with one back D-ring. The chest straps and leg straps close with mating buckles. Universal size. Ideal for small-scale maintenance works, construction works, etc.
Peakworks product code: V8002000 or model FBH-10000A
Complies with ANSI Z359.1 and CSA Z259.10-12.
This harness can support a maximum weight of 400 lb (180 kg), including clothing, tools, etc.
This lightweight safety harness is equipped with one back D-ring made of steel. This Peakworks safety harness is made of woven non-stretch polyester. Polyester offers a superior resistance to acids. The chest straps and leg straps close with mating buckles. The harness certification tags are sewn on the front straps.
Inspection:
The worker is responsible for visually inspecting the harness before each use. During this routine inspection, the worker must note any signs of degradation, malfunction, or breakage. The harness will have to be replaced if any such signs are detected.
On top of this routine inspection, the harness must be inspected by a qualified person different than the worker that wears the harness. The frequency of these inspections varies according to the manufacturer. Some manufacturers require an inspection every 90 days, others every 180 days, or even yearly. These inspections should be performed more often if the harness is worn in extreme environmental working conditions.
The recommended lifetime of a safety harness if 5 years. While some manufacturers keep silent on this topic, in practice, if the harness is used regularly and stored and maintained in standard conditions, its lifetime will not exceed 5 years in most cases.
Sylprotec offers a safety harness inspection service. Find out more by clicking on the Services tab, under the Sylprotec logo at the top of the page.
Any equipment that has withstood a fall or an impact must be scrapped.
Maintenance:
For cleaning, use a gentle soap or detergent and lukewarm water (37°C). Do not use bleach, chlorine, or other abrasive or chemical products. If your harness is too dirty or contaminated, it is time to replace it. Air dry without using heat, in a clean environment. You can accelerate the drying process by wiping the wet harness with a clean absorbent wipe, or by using a fan. Avoid exposing the harness to sunlight and to any sources of contamination.
Suggestion:
To complete your fall protection you will find a range of lanyards, retractable and anchors. Some products are suggested under the "accessories" tab at the bottom of this page.
Other equipment frequently used with this safety harness:
Safety glasses YA12E93101DX
Liberty TA14LR safety helmet and the essential TA14CS chin strap
EPTCONE28 Traffic Cones
Peakworks FPBAG storage bag
The FPL9900 Tool Strap
FPH2000A
Data sheet
- Type of product
- Safety equipment
- Main category
- Personal protection
- Sub category
- Fall protection
- Sub sub category
- Fall protection safety harness
- Name of the product
- Safety harness
- Series of products
- Contractor
- Product code
- FPH2000A
- Approved/Certified
- Meets the standards ANSI Z359.11-2014 and CSA Z259.10-12
- Manufacturer
- Peakworks
- Country of origin
- China
- Choice of format
- Universal sizes (medium to extra-large)
- Reusable
- Reusable with careful inspection and proper installation
- Features
- The chest and leg straps are joined by interlocking buckles
- Additional Features
- This harness has 5 adjustment points: 2 on the legs, 2 on the torso and 1 on the chest
- Characteristic adding safety
- This harness is equipped with a sub-pelvic strap
- Characteristics of metal parts
- Non-painted metal parts
- Includes
- With a steel back ring.
- Includes 3
- The ends of the straps have plastic tips to prevent fraying and allow the user to adjust the harness easily even when wearing work gloves
- Property of the material
- Polyester straps offer better resistance to acidic chemicals
- Classification
- Class A
- Feature that facilitates use
- The straps have distinct colors for easy donning
- Material1
- Polyester
- Material2
- Steel
- Washable
- Wash in warm water, 98.60°F/ 37°C. Never use bleach or other abrasive or chemical products on your harness. Air dry
- Length (in/cm)
- 11 in / 27.94 cm
- Width (in/cm)
- 11 in / 27.94 cm
- Height (in/cm)
- 2 in / 5.08 cm
- Weight (lb/kg)
- 2 lb / 0.9 Kg
- Sold by
- Unit
- Color
- High Visibility Green/Black/Grey
- Another packaging available
- 5 units per box
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Caution
- The maximum weight of the worker that can wear this harness is 400 lb / 181.4 kg, including clothing, tools, etc.
New
You might also like
8 other products in the same category:
Customers who bought this product also bought:
