Peakworks
Contractor Peakworks harness for ladder, controlled descent and confined space, 6 D-rings class A, P, L, E
FPH2000APLE
$153.30
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Peakworks safety harness. CSA class A, P, L and E. With 6 D-rings: 1 back, 2 lateral for positioning, 2 on the shoulders for confined space rescue, and 1 frontal (sternal) for ladders and controlled descent. The chest and leg straps close with mating buckles.
Peakworks product code: V8002060 or model FBH-10000.
Complies with CSA standard Z259.10-06.
Universal size. Ideal for ladder work, confined spaces, controlled descent, maintenance work, construction work, etc.
This harness can support a maximum weight of 400 lb (180 kg), including clothing, tools, etc.
This lightweight North safety harness is made of woven non-stretch polyester. Polyester offers a superior resistance to acids. The front strap the chest level (also called the Bavarian) are equipped with a small D-ring that allows the connection of the harness with a ladder. For women, we recommend instead the Miss Miller harness models. The chest straps and leg straps close with mating buckles. Product identification and certification labels are sewn onto the back straps on the left side of the safety harness.
Inspection:
The worker is responsible for visually inspecting the harness before each use. During this routine inspection, the worker must note any signs of degradation, malfunction, or breakage. The harness will have to be replaced if any such signs are detected.
On top of this routine inspection, the harness must be inspected by a qualified person different than the worker that wears the harness. The frequency of these inspections varies according to the manufacturer. Some manufacturers require an inspection every 90 days, others every 180 days, or even yearly. These inspections should be performed more often if the harness is worn in extreme environmental working conditions.
The recommended lifetime of a safety harness if 5 years. While some manufacturers keep silent on this topic, in practice, if the harness is used regularly and stored and maintained in standard conditions, its lifetime will not exceed 5 years in most cases.
Sylprotec offers a safety harness inspection service. Find out more by clicking on the Services tab, under the Sylprotec logo at the top of the page.
Any equipment that has withstood a fall or an impact must be scrapped.
Maintenance:
For cleaning, use a gentle soap or detergent and lukewarm water (37°C). Do not use bleach, chlorine, or other abrasive or chemical products. If your harness is too dirty or contaminated, it is time to replace it.
Air dry without using heat, in a clean environment. You can accelerate the drying process by wiping the wet harness with a clean absorbent wipe, or by using a fan. Avoid exposing the harness to sunlight and to any sources of contamination.
Suggestion:
To complete your fall protection you will find a range of lanyards, retractable and anchors. Some products are suggested under the "accessories" tab at the bottom of this page.
Other equipment frequently used with this safety harness:
Safety glasses YA12E93101DX
Liberty TA14LR safety helmet and the essential TA14CS chin strap
EPTCONE28 Traffic Cones
Peakworks FPBAG storage bag
The FPL9900 Tool Strap
FPH2000APLE
Data sheet
- Type of product
- Safety equipment
- Main category
- Personal protection
- Sub category
- Fall protection
- Sub sub category
- Fall protection safety harness
- Name of the product
- Safety harness
- Series of products
- Contractor
- Product code
- FPH2000APLE
- Approved/Certified
- Meets the standards ANSI Z359.11-2014 and CSA Z259.10-12
- Manufacturer
- Peakworks
- Country of origin
- China
- Choice of format
- Universal sizes (medium to extra-large)
- Reusable
- Reusable with careful inspection and proper installation
- Features
- The chest and leg straps are joined by interlocking buckles
- Additional Features
- This harness has 5 adjustment points: 2 on the legs, 2 on the torso and 1 on the chest
- Characteristic adding safety
- This harness is equipped with a sub-pelvic strap
- Characteristics of metal parts
- Non-painted metal parts
- Includes
- With 6 D-rings: 1 dorsal ring, 2 lateral rings for positioning, 2 rings on the shoulders for recovery in enclosed spaces, and 1 frontal (sternal) ring for climbing up and down
- Includes 3
- The ends of the straps have plastic tips to prevent fraying and allow the user to adjust the harness easily even when wearing work gloves
- Property of the material
- Polyester straps offer better resistance to acidic chemicals
- Classification
- Classe A, P, L, E
- Feature that facilitates use
- The straps have distinct colors for easy donning
- Material1
- Polyester
- Material2
- Steel
- Washable
- Wash in warm water, 98.60°F/ 37°C. Never use bleach or other abrasive or chemical products on your harness. Air dry
- Length (in/cm)
- 11 in / 27.94 cm
- Width (in/cm)
- 11 in / 27.94 cm
- Height (in/cm)
- 2 in / 5.08 cm
- Weight (lb/kg)
- 4.2 lb / 1.91 Kg
- Sold by
- Unit
- Color
- High Visibility Green/Black/Grey
- Another packaging available
- 5 units per box
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Caution
- The maximum weight of the worker that can wear this harness is 400 lb / 181.4 kg, including clothing, tools, etc.
New
You might also like
8 other products in the same category:
Customers who bought this product also bought:
