Peakworks
Peakworks contractor class A, P, full body harness equipped with 3 stand D-Ring
FPH2000AP
$118.70
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Peakworks contractor class A & P, full body fall arrest harness equipped with 1 stand-up back D-Ring and 2 positioning lateral D-Ring. Webbings on the chest and at the thighs feature. This full body harness is ideal for general tasks at heights which require this type of equipment such as maintenance or construction work.
Peakworks product code: V8002010 or model FBH-10000B.
Meets ANSI Z359.1 and CSA Z259.10-12 requirements.
This harness can support a weight of 400 lb (180 kg) including clothing, tools and equipment.
All straps on this safety harness are made of extensible woven polyester straps, since this material offers a superior chemical resistance. The straps located on the chest and thighs with pass thru buckle. Moreover, the straps from the shoulders to the hips are equipped with an adjustment buckle. This safety harness is equipped with one back D-ring and two side D-ring made of steel.
The product identification and certification labels are sewn onto the strap on the back left side of the safety harness so to ease management, tracking and inspections of your fall protection safety equipment.
Inspection:
The worker is responsible for visually inspecting the harness before each use. During this routine inspection, the worker must note any signs of degradation, malfunction, or breakage. The harness will have to be replaced if any such signs are detected.
On top of this routine inspection, the harness must be inspected by a qualified person different than the worker. The frequency of these inspections varies according to the manufacturer. Some manufacturers require an inspection every 90 days, others every 180 days, or even yearly. These inspections should be performed more often if the harness is worn in extreme environmental working conditions.
The recommended lifetime of a harness is 5 years. While some manufacturers keep silent on this topic, in practice, if the lanyard is used regularly and stored and maintained in standard conditions, its lifetime will not exceed 5 years in most cases.
Sylprotec offers a harness inspection service. Find out more by clicking on the Services tab, under the Sylprotec logo at the top of the page.
Any equipment that has withstood a fall or an impact must be scrapped.
Maintenance:
For cleaning, use a gentle soap or detergent and lukewarm water (37°C). Do not use bleach, chlorine or other abrasive or chemical products. If your harness is too dirty or contaminated, it is time to replace it. Air dry without using heat in a clean environment. You can accelerate the drying process by wiping the wet harness with a clean absorbent wipe, or by using a fan. Avoid exposure to sunlight and to any sources of contamination.
Suggestion:
To complete your fall protection you will find a range of lanyards, retractable and anchors. Some products are suggested under the "accessories" tab at the bottom of this page.
Other equipment frequently used with this safety harness:
Safety glasses YA12E93101DX
Liberty TA14LR safety helmet and the essential TA14CS chin strap
EPTCONE28 Traffic Cones
Peakworks FPBAG storage bag
The FPL9900 Tool Strap
FPH2000AP
Data sheet
- Type of product
- Safety equipment
- Main category
- Personal protection
- Sub category
- Fall protection
- Sub sub category
- Fall protection safety harness
- Name of the product
- Safety harness
- Series of products
- Contractor
- Product code
- FPH2000AP
- Approved/Certified
- Meets the standards ANSI Z359.11-2014 and CSA Z259.10-12
- Manufacturer
- Peakworks
- Country of origin
- China
- Choice of format
- Universal sizes (medium to extra-large)
- Reusable
- Reusable with careful inspection and proper installation
- Features
- The chest and leg straps are joined by interlocking buckles
- Additional Features
- This harness has 5 adjustment points: 2 on the legs, 2 on the torso and 1 on the chest
- Characteristic adding safety
- This harness is equipped with a sub-pelvic strap
- Characteristics of metal parts
- Non-painted metal parts
- Includes
- With 3 rings: 1 dorsal D ring and 2 positioning rings located at the hips
- Includes 3
- The ends of the straps have plastic tips to prevent fraying and allow the user to adjust the harness easily even when wearing work gloves
- Property of the material
- Polyester straps offer better resistance to acidic chemicals
- Classification
- Class A, P
- Feature that facilitates use
- The straps have distinct colors for easy donning
- Material1
- Polyester
- Material2
- Steel
- Washable
- Wash in warm water, 98.60°F/ 37°C. Never use bleach or other abrasive or chemical products on your harness. Air dry
- Length (in/cm)
- 11 in / 27.94 cm
- Width (in/cm)
- 11 in / 27.94 cm
- Height (in/cm)
- 2 in / 5.08 cm
- Weight (lb/kg)
- 2.2 lb / 0.99 Kg
- Sold by
- Unit
- Color
- High Visibility Green/Black/Grey
- Another packaging available
- 5 units per box
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Caution
- The maximum weight of the worker that can wear this harness is 400 lb / 181.4 kg, including clothing, tools, etc.
New
You might also like
8 other products in the same category:
Customers who bought this product also bought:
