Peakworks
Peakworks harness tool attachment strap with locking carabiners
FPLA9903
$49.15
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Peakworks harness tool attachment strap with locking carabiners. These cords must be paired with retaining clamps to operate. Clamps are sold separately. See FPLA, FPLAP, FPLAB products.
Peakworks product code: V856240 or model TT-9903
- Slim attachment strap that attaches to the 28 in. (71 cm), 5/8 in. (1.59 cm) wide for smaller, lighter tools
- Autolocking swivel carabiners at both ends for added security when attached
- Capacity of 15 lb (6.82 kg)
- Durable for long-lasting use
- Made of polyester
Maintenance:
For cleaning, use a gentle soap or detergent and lukewarm water (37°C). Do not use bleach, chlorine, or other abrasive or chemical products. If your strap is too dirty or contaminated, it is time to replace it. Air dry without using heat, in a clean environment. You can accelerate the drying process by wiping the wet harness with a clean absorbent wipe, or by using a fan. Avoid exposing the harness to sunlight and to any sources of contamination.
Suggestion:
To complete your fall protection you will find a range of lanyards, retractable and anchors. Some products are suggested under the "accessories" tab at the bottom of this page.
Other equipment frequently used with this safety equipment:
Clamp for round tools FPLA
Clamp for flat tools FPLAP
Retaining block for round tools FPLAB
Peakworks FPBAG storage bag
The FPH4000AP safety harness
FPLA9903
Data sheet
- Type of product
- Safety equipment
- Main category
- Personal protection
- Sub category
- Fall protection
- Sub sub category
- Fall protection safety harness
- Name of the product
- Tool attachment strap
- Product code
- FPL9903
- Approved/Certified
- None
- Manufacturer
- Peakworks
- Country of origin
- China
- Format
- Length 28" / 71 cm by 5/8" / 1.59 cm wide
- Reusable
- Reusable with careful inspection and proper installation
- Features
- Harness tool strap with carabiners for lightweight tools
- Characteristic adding safety
- Features two self-locking carabiners that swivel at each end for added security
- Includes
- With two carabiners
- Property of the material
- Polyester straps offer better resistance to acidic chemicals
- Load capacity
- Maximum capacity of 15 lb / 6.82 Kg
- Material1
- Polyester
- Material2
- Steel
- Washable
- Wash in warm water, 98.60°F/ 37°C. Never use bleach or other abrasive or chemical products on your strap. Air dry
- Length (in/cm)
- 6 in / 15.24 cm
- Width (in/cm)
- 3 in / 7.6 cm
- Height (in/cm)
- 2 in / 5.08 cm
- Weight (lb/kg)
- 2 lb / 0.9 Kg
- Sold by
- Unit
- Color
- High Visibility Green
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Caution
- These cords must be paired with retaining clamps to operate, see FPLA, FPLAP, FPLAB products
New
You might also like
8 other products in the same category:
