Peakworks
Clamp for flat tools ranging from 5/16" to 1-5/16" (8 mm to 33 mm) in width from Peakworks
FPLAP824
$8.50
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Clamp for flat tools ranging from 5/16" to 1 5/16" (8 mm to 33 mm) in width. Two products are available to suit different widths, please make your selection from the drop down menu above. These clamps must be paired with the retaining cords to function. Cords are sold separately. See products FPLA9900, FPLA9901, FPLA9902, FPLA9903.
Peakworks manufacturer's code for the different diameters :
Product: V8561501, model: TT-5000-1 for flat tools 5/16" to 15/16" (8 to 24 mm) wide
Product: V8561601, model: TT-6000-1 for flat tools 9/16" to 1-5/16" (14 to 33 mm) wide flat tools.
Discontinued product, final sale.
Product available while supplies last.
Customers who order more than we have in stock will be reimbursed for any shortfall.
|
Reference |
Size |
In stock |
|
FPLAP1433 |
1/2 to 3/4 in, 13 mm to 19 mm |
5 |
|
FPLAP824 |
8 mm à 24 mm |
1 |
- Tested to CSA standards under extreme conditions
- Suitable for different size tools, especially flat tools
- High density polyethylene (HDPE) plastic
- Contains a hex key and instructions
Maintenance:
For cleaning, use mild soap and clean warm water (37°C). Do not use bleach or other abrasive or chemical products. If your clamp is too dirty or contaminated, it is time to replace it. Air dry without excessive heat in a clean environment. You can help by wiping with a very clean absorbent cloth or by using a fan. Avoid exposing the sling to sunlight or any source of contamination.
Suggestion:
To complete your fall protection you will find a range of lanyards, self-retracting lanyards and anchors. Some products are suggested under the "accessories" tab at the bottom of this page.
Other equipment frequently used with this safety equipment:
Peakworks FPBAG storage bag
The FPH4000AP safety harness
Tool strap to be attached to the wrist 18 in (45.7 cm) long, 15 lb max, FPLA9900
Harness-mounted tool strap 32" (81 cm) long, 30 lb max, FPLA9901
Harness-mounted tool sling, lightweight tools under 15 lb, 28 in. long, FPLA9902
Peakworks wrist tool strap with carabiners, FPLA9903
FPLAP824
Data sheet
- Type of product
- Safety equipment
- Main category
- Personal protection
- Sub category
- Fall protection
- Sub sub category
- Fall protection safety harness
- Name of the product
- Clamp for flat tools
- Product code
- FPLAP
- Approved/Certified
- None
- Manufacturer
- Peakworks
- Country of origin
- China
- Choice of format
- Available in 2 sizes, FPLAP824: for flat tools from 5/16" to 15/16" / 8 mm to 24 mm, FPLAP1433: for flat tools from 9/16" to 1-5/16" / 14 mm to 33 mm
- Reusable
- Reusable with careful inspection and proper installation
- Features
- Clamp for flat tools with widths ranging from 5/16" to 1-5/16" / 8 mm to 33 mm
- Additional Features
- Two separate products are available to fit different diameters. They are sold separately
- Includes
- Contains a hex key and instructions for use
- Material1
- High density polyethylene (HDPE)
- Material2
- Steel
- Washable
- Wash with soap and water if necessary
- Length (in/cm)
- 6 in / 15.24 cm
- Width (in/cm)
- 3 in / 7.6 cm
- Height (in/cm)
- 2 in / 5.08 cm
- Weight (lb/kg)
- 2 lb / 0.9 Kg
- Sold by
- Unit
- Color
- High Visibility Green
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
- Caution
- These clamps must be paired with the retaining cords, see products FPLA9900, FPLA9901, FPLA9902, FPLA9903
Specific References
- upc
- 626053588076
New
You might also like
8 other products in the same category:
