Dentec Koala Behr harness 1 Ring, universal size, quick connect buckles, class A

Dentec's Koala Behr safety harness, class A, with a dorsal ring and quick-release buckles (Quik-connect). This harness is offered in universal size (medium to extra-large). This type of harness is designed for workers who are looking for comfort. Designed for regular construction work, maintenance, etc.

Dentec product code: 16H02474F1.

Complies with CSA Z259.10 and ANSI Z359.11-2014.

The maximum worker weight that you can wear this harness is 310 lb (141 kg), including clothing, tools, etc.

The Dentec Safety Harness is made with black tubular polyester webbing. The soft, tubular, cushioned straps at the top provide incredible comfort throughout the body of the harness for all day use. No need for shoulder pads. This harness has 5 adjustment points: 2 on the legs, 2 on the torso and 1 on the chest. To improve safety, this harness is equipped with a sub-pelvic strap. Two rigid plastic retaining buckles allow the user to hang the lanyard when not in use and help prevent tripping hazards.

The chest and thigh straps are joined by quick connect buckles. The quick connect buckles are made of steel. In addition, its opening mechanism is anti-panic as it requires simultaneous pressure on each side of the buckle to release it. They allow the user to put on and take off the harness quickly and easily.

Plastic tips at the end of each strap prevent fraying and help adjust the harness easily even with work gloves. Polyester straps offer better resistance to acidic chemicals.

Product identification and certification labels are sewn onto the back straps on the right side of the safety harness. It includes a drop indicator for easy inspection. The label cover has a hook and loop closure that protects the inspection labels from elements such as the sun, dirt, rain, snow, oils, etc..

The Behr Koala Harness is our most comfortable harness, designed to provide exceptional comfort for extended use.

Inspection:

The worker is responsible for visually inspecting the harness before each use. During this routine inspection, the worker must note any signs of degradation, malfunction, or breakage. The harness will have to be replaced if any such signs are detected.

On top of this routine inspection, the harness must be inspected by a qualified person different than the worker that wears the harness. The frequency of these inspections varies according to the manufacturer. Some manufacturers require an inspection every 90 days, other every 180 days, or even yearly. These inspections should be performed more often if the harness is worn in extreme environmental working conditions.

The recommended lifetime of a safety harness if 5 years. While some manufacturers keep silent on this topic, in practice, if the harness is used regularly and stored and maintained in standard conditions, its lifetime will not exceed 5 years in most cases.

Sylprotec offers a safety harness inspection service. Find out more by clicking on the Services tab, under the Sylprotec logo at the top of the page.

Any equipment that has withstood a fall or an impact must be scrapped.

Maintenance:

For cleaning, use a gentle soap or detergent and lukewarm water (37°C). Do not use bleach, chlorine, or other abrasive or chemical products. If your harness is too dirty or contaminated, it is time to replace it. Air dry without using heat, in a clean environment. You can accelerate the drying process by wiping the wet harness with a clean absorbent wipe, or by using a fan. Avoid exposing the harness to sunlight and to any sources of contamination.

Suggestion:

To complete your fall protection you will find a range of lanyards, retractable and anchors. Some products are suggested under the "accessories" tab at the bottom of this page.

Other equipment frequently used with this safety harness:

Safety glasses YA12E93101DX
Liberty TA14LR safety helmet and the essential TA14CS chin strap
EPTCONE28 Traffic Cones
Peakworks FPBAG storage bag
The FPL9900 Tool Strap

The texts coloured in green correspond to hyperlinks leading to specific safety equipment or to a general information link.