Aluminum sign for double fire hydrant connected to an automatic sprinkler system, with basement inscription...

Aluminum sign to indicate a double fire hydrant (terminal or Siamese valve) connected to an automatic sprinkler system. The special feature of this sign is that it tells the fire department that the system is for the basement and first floor only. With this information, fire departments can adjust their response plans accordingly. If your building is not fully protected, it's important to make this clear. This product is sold with this inscription, but you can contact us to request other inscriptions. This sign is compliant with the NFPA 170-2015 Standard for Fire Safety and Emergency Symbols.

This sign is compliant with the NFPA 170-2015 Standard for Fire Safety and Emergency Symbols.

Available sizes:

• 12 inches x 12 inches (30.5 cm x 30.5 cm).
• 18 inches x 18 inches (45.7 cm x 45.7 cm).

 Coating options:

• Standard UV-resistant coating, for long-lasting colors.
• Engineer grade (EG) retro-reflective coating with glass microbeads. Includes UV-resistant coating. 

Aluminium panel thickness: 0.040 inches (40 mils, 1.02 mm)
The sign does not have pre-drilled mounting holes.

Other formats are available as a special order. Contact Sylprotec for an estimate. 

The Quebec Fire Safety Act requires that any employer and building owner provide “all persons to seek to remove or reduce fire hazards by acting with foresight and prudence in that regard.” Although displaying safety signs is not mandatory, each and every city has its own Law concerning fire safety. In Montreal, the Service de sécurité incendie de Montréal specifies that: “The location of hose connectors should be indicated by signs that are visible from the street so that firefighters can find them easily and hook up to them quickly.” Signaling a siamese connection is thus mandatory, especially that it is more and more common for buildings, mainly industrials, to have several pieces of fire protection equipment that require water. Each of them needs its own hose connector. It is also important to place signs over each hose connector to indicate the equipment with which it is used. Sylprotec’s Emergency and Fire signs are well outlined and deliver swiftly the message you wish to spread that in any emergency, they will make one spare some valuable time regardless of their language abilities.

Please contact our customer service for any custom-made sizes signs. Allow at least four (4) weeks of delays for the reception of special orders. If you can’t find the sign you’re looking for, call us and we’ll customize our products accordingly.

Suggestions:
Need additional safety equipment? See the items displays assembly point (ECU508), if you have a single Siamese connection (EI302), the label in case of emergency calls 911 (EI403), to protect your pipe against vermin with threaded plugs (ICC251) under "Accessories" at the bottom of the page. If you're looking for work equipment, have a look at the following products "Accessories" at the bottom of the page. If you're looking for work equipment, have a look at the following products: Sentec safety eyewear (YA12E90801), Cee tec protective eyewear clear (YA12E93101DX), Anti-cut glove in PEHP (GZ13PEHPFN), High visibility orange safety vest (VV50). 

The texts colored in green correspond to hyperlinks leading to specific safety equipment or to a general information link.