15 in long Endura® side-split cowhide glove for MIG & Stick welding. Large one-size-fits-all, sold in pairs.
G603
$12.50
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Endura® side-split cowhide welding glove of a total length of 15 in (38 cm). This model of glove has been designed for metal inert gas (MIG) welding and shielded metal arc welding (stick welding). Large one-size-fits-all, sold in pairs.
Superior manufacturer’s code: 505BU
This glove has a heat resistance level 2 according to ASTM and ANSI standards.
G603 peculiarities:
This glove features a wing thumb which is an angled construction with no seams on the palm side to obstruct work or cause fatigue, all this to allow a better flexibility. This one-piece back glove provides an excellent protection against brands which could land on a burnt seam since there are no seams to burn. Seams located in critical places are leather-welted with Kevlar® thread for better durability. At last, this glove is fully lined with cotton which combined to leather that has good capacity for heat absorption, provide a thermal protection. This glove may protect you from temperatures up to 350°F (175°C).
Side-split leather properties:
Side-split leather comes from the slitting of thicker hides in two sheets: the surface of the skin, the finest part known as ‘full grain’ is the real leather as opposed to the subsurface, known as split-leather. Split-leather is quite resistant to abrasion, but thicker and may feature a more raw aspect and irregularities.
Use for:
These gloves are recommended for application such as welding, smelting plants and steel mills.
Do not use for:
It is not recommended to immerse this glove in water or any other liquid brought to boil since their fabric only offers a limited protection against heat conduction. Even though leather provides quite a good protection against heat, it does not rule out the risk of burns or any other mechanical hazards.
Maintenance and service life:
It is not recommended to wash this glove since water and soap tend to rob leather of its natural oils which makes it stiffen and become brittle. If the nature of your work requires that you wash them, we recommend that you dry clean them.
G603
Data sheet
- Type of product
- Safety equipment
- Main category
- Personal protection
- Sub category
- Gloves
- Sub sub category
- Heat-resistant gloves
- Name of the product
- Welding glove
- Series of products
- Endura™
- Product code
- G603
- Approved/Certified
- ANSI 2 heat
- Manufacturer
- Superior gloves
- Available sizes
- Size 9 large only
- Length (in/cm)
- 12 in / 30.48 cm 15 in - 38 cm
- Inside of the glove
- This glove is fully lined with cotton
- Thermal protection
- This glove may protect you from temperatures up to 350°F / 175°C
- Type of seam
- Seams located in critical places are leather-welted with Kevlar®
- Reusable
- Reusable with prior hygienic measurement
- Material
- Cowhide leather
- Not washable
- It is preferable to replace this glove when it is too worn or soiled. Do not attempt to wash them
- Width (in/cm)
- 6 in / 15.24 cm
- Height (in/cm)
- 1 in / 2.54 cm
- Weight (lb/kg)
- 2 lb / 0.9 Kg
- Sold by
- Pair
- Color
- Blue
- Another packaging available1
- By the dozen (12 pairs)
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
New
You might also like
8 other products in the same category:
Customers who bought this product also bought:
