Cutban™ ASTM/ANSI cut-resistant level 2 high-tenacity filament yarn knit sleeves of a total length of 14 in. Sold in pairs.
VSKPW14TH
$5.50
Return conditions:
No returnable if used. For more information about our return policy, please refer to the Orders and Returns.
Cutban™ cut-resistant high-tenacity filament yarn knit sleeves of a total length of 14 in (35,5 cm). Available in large (9) size only. Sold in pairs.
Superior manufacturer’s code: KPW14TH
This sleeve has a cut resistance level 2 according to ASTM and ANSI standards.
VSKPW14TH peculiarities:
This seamless high-tenacity composite sleeve features a double-layer tubular knit for a snug fit. Ergonomic by design, this sleeve provides a thumbhole to allow a protection over the hand without entangling your fingers. It will most likely cover your whole forearm and depending on your physiognomy, even your elbow.
Use for:
Such a sleeve is recommended for workers dealing with hot environment where wearing heavy protective garments may be a burden, but one must still protects oneself from mechanical hazards. The manufacturer suggests this sleeve to workers handling metal sheets which may be sharp from time to time. This sleeve is also great for the automotive industry and metal fabrication.
Do not use for:
This sleeve should never be worn while performing tasks which may generate sparks or flames. Of course, this sleeve offers no sure protection against cuts, wear, tear and puncture so mechanical risks should not be overlooked.
Maintenance and service life:
It is recommended to carry out a basic maintenance to extend the service life of your sleeves. Simply wash them with cold water, that is, 85°F/30°C, and a mild detergent. You can then dry them at low temperature in a dryer. Never use bleach on this sleeve.
VSKPW14TH
Data sheet
- Type of product
- Safety equipment
- Main category
- Personal protection
- Sub category
- Safety clothing
- Sub sub category
- Sleeves
- Name of the product
- Anti-cut sleeves
- Series of products
- Cutban™
- Product code
- VSKPW14TH
- Approved/Certified
- ANSI A2 cut
- Manufacturer
- Superior gloves
- Country of origin
- Unknown origin
- Format
- 14 in / 35.5 cm
- Reusable
- Reusable with prior hygienic measurement
- Maintenance free
- Discard if damaged, contaminated, dirty or worn
- Features
- With opening for the thumb
- Splash protection
- Does not protect against splashes
- Material
- Composite fiber
- Washable
- Wash in warm water, 98.60°F/ 37°C. Never use bleach or other abrasive or chemical products on your harness. Air dry
- Length (in/cm)
- 2 in / 5.08 cm
- Width (in/cm)
- 2 in / 5.08 cm
- Height (in/cm)
- 2 in / 5.08 cm
- Weight (lb/kg)
- 0.5 lb / 0.22 Kg
- Sold by
- Pair
- Color
- Black
- Made in Canada
- Yes
- Return conditions
- No returnable if used. For more information about our return policy, please refer to the "Orders and Returns" link on the home page
New
You might also like
8 other products in the same category:
Customers who bought this product also bought:
